Hannspree Hf199H Manual3/25/2021
If you want to know more or withdraw your consent to all or some of the cookies, please refer to the cookie policy.By closing this banner, scrolling this page, clicking a link or continuing to browse otherwise, you agree to the use of cookies.FCC Class B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.Our products, whenever possible, contain recyclable materials which can be recycled into new devices.
![]() Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears. You may find slightly uneven brightness on the screen depending on the desktop pattern you use. Hannspree Hf199H Manual In ItsPlease carefully read this manual in its entirety before setting up, using or operating your Monitor. To ensure the safe and correct installation and operations of the Monitor, it is important that the safety and operation instructions in this manual are followed. Make sure that the power cord is the correct type required in your area. This LCD monitor has an Internal universal power supply that allows operation in either 100120V AC or 220240V AC voltage area (No user adjustment is required.) 3. Hold the stand so you do not topple the monitor when you change the monitors angle. You are able to adjust the monitors angle at 20 alternative from -5 to 15 or 0 to 20. The other control buttons are located at front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to your personal preferences. Activate the OSD menu or adjust the function settings and confirmation. Contrast adjustment: Select the Contrast option on the Main Menu. ![]() ![]() OSD vertical position adjustment: Select the OSD V-Position option to. Language: Select the Language option to change the language of the OSD. Input Setting: Select the Input Setting option to change between the analog (D-Sub) or Digital (DVI) source. No Plug Play or screen Check if the Video Card is Plug Play compatible. If the connector is loose, tighten the connector screws. Check the signal-cables connection pins for damage. INPUT NOT SUPPORT: Your computer has been set to an unsuitable display mode.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |